Inflation means there is a sustained increase in the price level. The main causes of inflation are either excess aggregate demand (economic growth too fast) or cost push factors (supply-side factors).
Summary of Main causes of inflation
- Demand-pull inflation – aggregate demand growing faster than aggregate supply (growth too rapid)
- Cost-push inflation – higher oil prices feeding through into higher costs
- Devaluation – increasing cost of imported goods, also boost to domestic demand
- Rising wages – higher wages increase firms costs and increase consumers’ disposable income to spend more.
- Expectations of inflation – causes workers to demand wage increases and firms to push up prices.
1. Demand-pull inflation
If the economy is at or close to full employment, then an increase in AD leads to an increase in the price level. As firms reach full capacity, they respond by putting up prices leading to inflation. Also, near full employment with labour shortages, workers can get higher wages which increase their spending power.
AD can increase due to an increase in any of its components C+I+G+X-M
We tend to get demand-pull inflation if economic growth is above the long-run trend rate of growth. The long-run trend rate of economic growth is the average sustainable rate of growth and is determined by the growth in productivity.
Example of demand-pull inflation in the UK
In the 1980s, the UK experienced rapid economic growth. The government cut interest rates and also cut taxes. House prices rose by up to 30% -fuelling a positive wealth effect and a rise in consumer confidence. This increased confidence led to higher spending, lower saving and an increase in borrowing. However, the rate of economic growth reached 5% a year – well above the UK’s long-run trend rate of 2.5 %. The result was a rise in inflation as firms could not meet demand. It also led to a current account deficit. You can read more about demand-pull inflation at the Lawson Boom of the 1980s.
2. Cost-push inflation
If there is an increase in the costs of firms, then businesses will pass this on to consumers. There will be a shift to the left in the AS.
Cost-push inflation can be caused by many factors
1. Rising wages
If trades unions can present a united front then they can bargain for higher wages. Rising wages are a key cause of cost push inflation because wages are the most significant cost for many firms. (higher wages may also contribute to rising demand)
2. Import prices
One-third of all goods are imported in the UK. If there is a devaluation, then import prices will become more expensive leading to an increase in inflation. A devaluation / depreciation means the Pound is worth less. Therefore we have to pay more to buy the same imported goods.
In 2011/12, the UK experienced a rise in cost-push inflation, partly due to the depreciation of the Pound against the Euro. (also due to higher taxes)
3. Raw material prices
The best example is the price of oil. If the oil price increase by 20% then this will have a significant impact on most goods in the economy and this will lead to cost-push inflation. E.g., in 1974 there was a spike in the price of oil causing a period of high inflation around the world.
4. Profit push inflation
When firms push up prices to get higher rates of inflation. This is more likely to occur during strong economic growth.
5. Declining productivity
If firms become less productive and allow costs to rise, this invariably leads to higher prices.
6. Higher taxes
If the government put up taxes, such as VAT and Excise duty, this will lead to higher prices, and therefore CPI will increase. However, these tax rises are likely to be one-off increases. There is even a measure of inflation (CPI-CT) which ignores the effect of temporary tax rises/decreases.
CPI-CT is less volatile because it ignores the effect of taxes. In 2010, some of the UK CPI inflation was due to rising taxes.
What else could cause inflation?
1. Rising house prices
Rising house prices do not directly cause inflation, but they can cause a positive wealth effect and encourage consumer-led economic growth. This can indirectly cause demand-pull inflation.
2. Printing more money
If the Central Bank prints more money, you would expect to see a rise in inflation. This is because the money supply plays an important role in determining prices. If there is more money chasing the same amount of goods, then prices will rise. Hyperinflation is usually caused by an extreme increase in the money supply.
However, in exceptional circumstances – such as liquidity trap/recession, it is possible to increase the money supply without causing inflation. This is because, in recession, an increase in the money supply may just be saved, e.g. banks don’t increase lending but just keep more bank reserves.
See: The link between money supply and inflation
Once inflation sets in it is difficult to reduce inflation. For example, higher prices will cause workers to demand higher wages causing a wage-price spiral. Therefore, expectations of inflation are important. If people expect high inflation, it tends to be self-serving.
The attitude of the monetary authorities is important; for example, if there was an increase in AD and the monetary authorities accommodated this by increasing the money supply then there would be a rise in the price level.
Last updated 7th June 2017.
This article is about a rise in the general price level. For the expansion of the early universe, see Inflation (cosmology). For other uses, see Inflation (disambiguation).
In economics, inflation is a sustained increase in the general price level of goods and services in an economy over a period of time. When the price level rises, each unit of currency buys fewer goods and services; consequently, inflation reflects a reduction in the purchasing power per unit of money – a loss of real value in the medium of exchange and unit of account within the economy. A chief measure of price inflation is the inflation rate, the annualized percentage change in a general price index, usually the consumer price index, over time. The opposite of inflation is deflation.
Inflation affects economies in various positive and negative ways. The negative effects of inflation include an increase in the opportunity cost of holding money, uncertainty over future inflation which may discourage investment and savings, and if inflation were rapid enough, shortages of goods as consumers begin hoarding out of concern that prices will increase in the future. Positive effects include reducing the real burden of public and private debt, keeping nominal interest rates above zero so that central banks can adjust interest rates to stabilize the economy, and reducing unemployment due to nominal wage rigidity.
Economists generally believe that high rates of inflation and hyperinflation are caused by an excessive growth of the money supply. Views on which factors determine low to moderate rates of inflation are more varied. Low or moderate inflation may be attributed to fluctuations in realdemand for goods and services, or changes in available supplies such as during scarcities. However, the consensus view is that a long sustained period of inflation is caused by money supply growing faster than the rate of economic growth. Inflation may also lead to an invisible tax in which the value of currency is lowered in contrast with its actual reserve, ultimately leading individuals to hold devalued legal tender.
Today, most economists favor a low and steady rate of inflation. Low (as opposed to zero or negative) inflation reduces the severity of economic recessions by enabling the labor market to adjust more quickly in a downturn, and reduces the risk that a liquidity trap prevents monetary policy from stabilizing the economy. The task of keeping the rate of inflation low and stable is usually given to monetary authorities. Generally, these monetary authorities are the central banks that control monetary policy through the setting of interest rates, through open market operations, and through the setting of banking reserve requirements.
Rapid increases in quantity of the money or in the overall money supply (or debasement of the means of exchange) have occurred in many different societies throughout history, changing with different forms of money used. For instance, when gold was used as currency, the government could collect gold coins, melt them down, mix them with other metals such as silver, copper, or lead, and reissue them at the same nominal value. By diluting the gold with other metals, the government could issue more coins without increasing the amount of gold used to make them. When the cost of each coin is lowered in this way, the government profits from an increase in seigniorage. This practice would increase the money supply but at the same time the relative value of each coin would be lowered. As the relative value of the coins becomes lower, consumers would need to give more coins in exchange for the same goods and services as before. These goods and services would experience a price increase as the value of each coin is reduced.
Song Dynasty China introduced the practice of printing paper money to create fiat currency. During the Mongol Yuan Dynasty, the government spent a great deal of money fighting costly wars, and reacted by printing more money, leading to inflation. Fearing the inflation that plagued the Yuan dynasty, the Ming Dynasty initially rejected the use of paper money, and reverted to using copper coins.
Historically, large infusions of gold or silver into an economy also led to inflation. From the second half of the 15th century to the first half of the 17th, Western Europe experienced a major inflationary cycle referred to as the "price revolution", with prices on average rising perhaps sixfold over 150 years. This was largely caused by the sudden influx of gold and silver from the New World into Habsburg Spain. The silver spread throughout a previously cash-starved Europe and caused widespread inflation. Demographic factors also contributed to upward pressure on prices, with European population growth after depopulation caused by the Black Death pandemic.
By the nineteenth century, economists categorized three separate factors that cause a rise or fall in the price of goods: a change in the value or production costs of the good, a change in the price of money which then was usually a fluctuation in the commodity price of the metallic content in the currency, and currency depreciation resulting from an increased supply of currency relative to the quantity of redeemable metal backing the currency. Following the proliferation of private banknote currency printed during the American Civil War, the term "inflation" started to appear as a direct reference to the currency depreciation that occurred as the quantity of redeemable banknotes outstripped the quantity of metal available for their redemption. At that time, the term inflation referred to the devaluation of the currency, and not to a rise in the price of goods.
This relationship between the over-supply of banknotes and a resulting depreciation in their value was noted by earlier classical economists such as David Hume and David Ricardo, who would go on to examine and debate what effect a currency devaluation (later termed monetary inflation) has on the price of goods (later termed price inflation, and eventually just inflation).
The adoption of fiat currency by many countries, from the 18th century onwards, made much larger variations in the supply of money possible. Since then, huge increases in the supply of paper money have taken place in a number of countries, producing hyperinflations – episodes of extreme inflation rates much higher than those observed in earlier periods of commodity money. The hyperinflation in the Weimar Republic of Germany is a notable example. Currently, the hyperinflation in Venezuela is the highest in the world, with an annual inflation rate of around 536.2% as of October 2017.
The term "inflation" originally referred to increases in the amount of money in circulation. However, most economists today use the term "inflation" to refer to a rise in the price level. An increase in the money supply may be called monetary inflation, to distinguish it from rising prices, which may also for clarity be called "price inflation". Economists generally agree that in the long run, inflation is caused by increases in the money supply.
Conceptually, inflation refers to the general trend of prices, not changes in any specific price. For example, if people choose to buy more cucumbers than tomatoes, cucumbers consequently become more expensive and tomatoes cheaper. These changes are not related to inflation, they reflect a shift in tastes. Inflation is related to the value of currency itself. When currency was linked with gold, if new gold deposits were found, the price of gold and the value of currency would fall, and consequently prices of all other goods would become higher.
Other economic concepts related to inflation include: deflation – a fall in the general price level; disinflation – a decrease in the rate of inflation; hyperinflation – an out-of-control inflationary spiral; stagflation – a combination of inflation, slow economic growth and high unemployment; reflation – an attempt to raise the general level of prices to counteract deflationary pressures; and Asset price inflation – a general rise in the prices of financial assets without a corresponding increase in the prices of goods or services.
Since there are many possible measures of the price level, there are many possible measures of price inflation. Most frequently, the term "inflation" refers to a rise in a broad price index representing the overall price level for goods and services in the economy. The Consumer Price Index (CPI), the Personal consumption expenditures price index (PCEPI) and the GDP deflator are some examples of broad price indices. However, "inflation" may also be used to describe a rising price level within a narrower set of assets, goods or services within the economy, such as commodities (including food, fuel, metals), tangible assets (such as real estate), financial assets (such as stocks, bonds), services (such as entertainment and health care), or labor. Although the values of capital assets are often casually said to "inflate," this should not be confused with inflation as a defined term; a more accurate description for an increase in the value of a capital asset is appreciation. The Reuters-CRB Index (CCI), the Producer Price Index, and Employment Cost Index (ECI) are examples of narrow price indices used to measure price inflation in particular sectors of the economy. Core inflation is a measure of inflation for a subset of consumer prices that excludes food and energy prices, which rise and fall more than other prices in the short term. The Federal Reserve Board pays particular attention to the core inflation rate to get a better estimate of long-term future inflation trends overall.
See also: Consumer price index
The inflation rate is widely calculated by calculating the movement or change in a price index, usually the consumer price index. The inflation rate is the percentage change of a price index over time. The Retail Prices Index is also a measure of inflation that is commonly used in the United Kingdom. It is broader than the CPI and contains a larger basket of goods and services.
To illustrate the method of calculation, in January 2007, the U.S. Consumer Price Index was 202.416, and in January 2008 it was 211.080. The formula for calculating the annual percentage rate inflation in the CPI over the course of the year is: The resulting inflation rate for the CPI in this one-year period is 4.28%, meaning the general level of prices for typical U.S. consumers rose by approximately four percent in 2007.
Other widely used price indices for calculating price inflation include the following:
- Producer price indices (PPIs) which measures average changes in prices received by domestic producers for their output. This differs from the CPI in that price subsidization, profits, and taxes may cause the amount received by the producer to differ from what the consumer paid. There is also typically a delay between an increase in the PPI and any eventual increase in the CPI. Producer price index measures the pressure being put on producers by the costs of their raw materials. This could be "passed on" to consumers, or it could be absorbed by profits, or offset by increasing productivity. In India and the United States, an earlier version of the PPI was called the Wholesale price index.
- Commodity price indices, which measure the price of a selection of commodities. In the present commodity price indices are weighted by the relative importance of the components to the "all in" cost of an employee.
- Core price indices: because food and oil prices can change quickly due to changes in supply and demand conditions in the food and oil markets, it can be difficult to detect the long run trend in price levels when those prices are included. Therefore, most statistical agencies also report a measure of 'core inflation', which removes the most volatile components (such as food and oil) from a broad price index like the CPI. Because core inflation is less affected by short run supply and demand conditions in specific markets, central banks rely on it to better measure the inflationary impact of current monetary policy.
Other common measures of inflation are:
- GDP deflator is a measure of the price of all the goods and services included in gross domestic product (GDP). The US Commerce Department publishes a deflator series for US GDP, defined as its nominal GDP measure divided by its real GDP measure.
- Regional inflation The Bureau of Labor Statistics breaks down CPI-U calculations down to different regions of the US.
- Historical inflation Before collecting consistent econometric data became standard for governments, and for the purpose of comparing absolute, rather than relative standards of living, various economists have calculated imputed inflation figures. Most inflation data before the early 20th century is imputed based on the known costs of goods, rather than compiled at the time. It is also used to adjust for the differences in real standard of living for the presence of technology.
- Asset price inflation is an undue increase in the prices of real or financial assets, such as stock (equity) and real estate. While there is no widely accepted index of this type, some central bankers have suggested that it would be better to aim at stabilizing a wider general price level inflation measure that includes some asset prices, instead of stabilizing CPI or core inflation only. The reason is that by raising interest rates when stock prices or real estate prices rise, and lowering them when these asset prices fall, central banks might be more successful in avoiding bubbles and crashes in asset prices.[dubious– discuss]
Issues in measuring
Measuring inflation in an economy requires objective means of differentiating changes in nominal prices on a common set of goods and services, and distinguishing them from those price shifts resulting from changes in value such as volume, quality, or performance. For example, if the price of a 10 oz. can of corn changes from $0.90 to $1.00 over the course of a year, with no change in quality, then this price difference represents inflation. This single price change would not, however, represent general inflation in an overall economy. To measure overall inflation, the price change of a large "basket" of representative goods and services is measured. This is the purpose of a price index, which is the combined price of a "basket" of many goods and services. The combined price is the sum of the weighted prices of items in the "basket". A weighted price is calculated by multiplying the unit price of an item by the number of that item the average consumer purchases. Weighted pricing is a necessary means to measuring the impact of individual unit price changes on the economy's overall inflation. The Consumer Price Index, for example, uses data collected by surveying households to determine what proportion of the typical consumer's overall spending is spent on specific goods and services, and weights the average prices of those items accordingly. Those weighted average prices are combined to calculate the overall price. To better relate price changes over time, indexes typically choose a "base year" price and assign it a value of 100. Index prices in subsequent years are then expressed in relation to the base year price. While comparing inflation measures for various periods one has to take into consideration the base effect as well.
Inflation measures are often modified over time, either for the relative weight of goods in the basket, or in the way in which goods and services from the present are compared with goods and services from the past. Over time, adjustments are made to the type of goods and services selected to reflect changes in the sorts of goods and services purchased by 'typical consumers'. New products may be introduced, older products disappear, the quality of existing products may change, and consumer preferences can shift. Both the sorts of goods and services which are included in the "basket" and the weighted price used in inflation measures will be changed over time to keep pace with the changing marketplace.
Inflation numbers are often seasonally adjusted to differentiate expected cyclical cost shifts. For example, home heating costs are expected to rise in colder months, and seasonal adjustments are often used when measuring for inflation to compensate for cyclical spikes in energy or fuel demand. Inflation numbers may be averaged or otherwise subjected to statistical techniques to remove statistical noise and volatility of individual prices.
When looking at inflation, economic institutions may focus only on certain kinds of prices, or special indices, such as the core inflation index which is used by central banks to formulate monetary policy.
Most inflation indices are calculated from weighted averages of selected price changes. This necessarily introduces distortion, and can lead to legitimate disputes about what the true inflation rate is. This problem can be overcome by including all available price changes in the calculation, and then choosing the median value. In some other cases, governments may intentionally report false inflation rates; for instance, during the presidency of Cristina Kirchner (2007–2015) the government of Argentina was criticised for manipulating economic data, such as inflation and GDP figures, for political gain and to reduce payments on its inflation-indexed debt.
Historically, a great deal of economic literature was concerned with the question of what causes inflation and what effect it has. There were different schools of thought as to the causes of inflation. Most can be divided into two broad areas: quality theories of inflation and quantity theories of inflation.
The quality theory of inflation rests on the expectation of a seller accepting currency to be able to exchange that currency at a later time for goods that are desirable as a buyer. The quantity theory of inflation rests on the quantity equation of money that relates the money supply, its velocity, and the nominal value of exchanges. Adam Smith and David Hume proposed a quantity theory of inflation for money, and a quality theory of inflation for production.
Currently, the quantity theory of money is widely accepted as an accurate model of inflation in the long run. Consequently, there is now broad agreement among economists that in the long run, the inflation rate is essentially dependent on the growth rate of money supply relative to the growth of the economy. However, in the short and medium term inflation may be affected by supply and demand pressures in the economy, and influenced by the relative elasticity of wages, prices and interest rates.
The question of whether the short-term effects last long enough to be important is the central topic of debate between monetarist and Keynesian economists. In monetarism prices and wages adjust quickly enough to make other factors merely marginal behavior on a general trend-line. In the Keynesian view, prices and wages adjust at different rates, and these differences have enough effects on real output to be "long term" in the view of people in an economy.
Keynesian economics proposes that changes in money supply do not directly affect prices, and that visible inflation is the result of pressures in the economy expressing themselves in prices.
There are three major types of inflation, as part of what Robert J. Gordon calls the "triangle model":
- Demand-pull inflation is caused by increases in aggregate demand due to increased private and government spending, etc. Demand inflation encourages economic growth since the excess demand and favourable market conditions will stimulate investment and expansion.
- Cost-push inflation, also called "supply shock inflation," is caused by a drop in aggregate supply (potential output). This may be due to natural disasters, or increased prices of inputs. For example, a sudden decrease in the supply of oil, leading to increased oil prices, can cause cost-push inflation. Producers for whom oil is a part of their costs could then pass this on to consumers in the form of increased prices. Another example stems from unexpectedly high Insured losses, either legitimate (catastrophes) or fraudulent (which might be particularly prevalent in times of recession).
- Built-in inflation is induced by adaptive expectations, and is often linked to the "price/wage spiral". It involves workers trying to keep their wages up with prices (above the rate of inflation), and firms passing these higher labor costs on to their customers as higher prices, leading to a 'vicious circle'. Built-in inflation reflects events in the past, and so might be seen as hangover inflation.
Demand-pull theory states that inflation accelerates when aggregate demand increases beyond the ability of the economy to produce (its potential output). Hence, any factor that increases aggregate demand can cause inflation. However, in the long run, aggregate demand can be held above productive capacity only by increasing the quantity of money in circulation faster than the real growth rate of the economy. Another (although much less common) cause can be a rapid decline in the demand for money, as happened in Europe during the Black Death, or in the Japanese occupied territories just before the defeat of Japan in 1945.
The effect of money on inflation is most obvious when governments finance spending in a crisis, such as a civil war, by printing money excessively. This sometimes leads to hyperinflation, a condition where prices can double in a month or less. Money supply is also thought to play a major role in determining moderate levels of inflation, although there are differences of opinion on how important it is. For example, Monetarist economists believe that the link is very strong; Keynesian economists, by contrast, typically emphasize the role of aggregate demand in the economy rather than the money supply in determining inflation. That is, for Keynesians, the money supply is only one determinant of aggregate demand.
Some Keynesian economists also disagree with the notion that central banks fully control the money supply, arguing that central banks have little control, since the money supply adapts to the demand for bank credit issued by commercial banks. This is known as the theory of endogenous money, and has been advocated strongly by post-Keynesians as far back as the 1960s. It has today become a central focus of Taylor rule advocates. This position is not universally accepted – banks create money by making loans, but the aggregate volume of these loans diminishes as real interest rates increase. Thus, central banks can influence the money supply by making money cheaper or more expensive, thus increasing or decreasing its production.
A fundamental concept in inflation analysis is the relationship between inflation and unemployment, called the Phillips curve. This model suggests that there is a trade-off between price stability and employment. Therefore, some level of inflation could be considered desirable to minimize unemployment. The Phillips curve model described the U.S. experience well in the 1960s but failed to describe the stagflation experienced in the 1970s. Thus, modern macroeconomics describes inflation using a Phillips curve that is able to shift due to such matters as supply shocks and structural inflation. The former refers to such events like the 1973 oil crisis, while the latter refers to the price/wage spiral and inflationary expectations implying that inflation is the new normal. Thus, the Phillips curve represents only the demand-pull component of the triangle model.
Another concept of note is the potential output (sometimes called the "natural gross domestic product"), a level of GDP, where the economy is at its optimal level of production given institutional and natural constraints. (This level of output corresponds to the Non-Accelerating Inflation Rate of Unemployment, NAIRU, or the "natural" rate of unemployment or the full-employment unemployment rate.) If GDP exceeds its potential (and unemployment is below the NAIRU), the theory says that inflation will accelerate as suppliers increase their prices and built-in inflation worsens. If GDP falls below its potential level (and unemployment is above the NAIRU), inflation will decelerate as suppliers attempt to fill excess capacity, cutting prices and undermining built-in inflation.
However, one problem with this theory for policy-making purposes is that the exact level of potential output (and of the NAIRU) is generally unknown and tends to change over time. Inflation also seems to act in an asymmetric way, rising more quickly than it falls. Worse, it can change because of policy: for example, high unemployment under British Prime Minister Margaret Thatcher might have led to a rise in the NAIRU (and a fall in potential) because many of the unemployed found themselves as structurally unemployed (also see unemployment), unable to find jobs that fit their skills. A rise in structural unemployment implies that a smaller percentage of the labor force can find jobs at the NAIRU, where the economy avoids crossing the threshold into the realm of accelerating inflation.
A connection between inflation and unemployment has been drawn since the emergence of large scale unemployment in the 19th century, and connections continue to be drawn today. However, the unemployment rate generally only affects inflation in the short-term but not the long-term. In the long term, the velocity of money is far more predictive of inflation than low unemployment.
In Marxian economics, the unemployed serve as a reserve army of labor, which restrain wage inflation. In the 20th century, similar concepts in Keynesian economics include the NAIRU (Non-Accelerating Inflation Rate of Unemployment) and the Phillips curve.
Further information: Monetarism
Monetarists believe the most significant factor influencing inflation or deflation is how fast the money supply grows or shrinks. They consider fiscal policy, or government spending and taxation, as ineffective in controlling inflation. The monetarist economist Milton Friedman famously stated, "Inflation is always and everywhere a monetary phenomenon."
Monetarists assert that the empirical study of monetary history shows that inflation has always been a monetary phenomenon. The quantity theory of money, simply stated, says that any change in the amount of money in a system will change the price level. This theory begins with the equation of exchange:
- is the nominal quantity of money;
- is the velocity of money in final expenditures;
- is the general price level;
- is an index of the real value of final expenditures;
In this formula, the general price level is related to the level of real economic activity (Q), the quantity of money (M) and the velocity of money (V). The formula is an identity because the velocity of money (V) is defined to be the ratio of final nominal expenditure () to the quantity of money (M).
Monetarists assume that the velocity of money is unaffected by monetary policy (at least in the long run), and the real value of output is determined in the long run by the productive capacity of the economy. Under these assumptions, the primary driver of the change in the general price level is changes in the quantity of money. With exogenous velocity (that is, velocity being determined externally and not being influenced by monetary policy), the money supply determines the value of nominal output (which equals final expenditure) in the short run. In practice, velocity is not exogenous in the short run, and so the formula does not necessarily imply a stable short-run relationship between the money supply and nominal output. However, in the long run, changes in velocity are assumed to be determined by the evolution of the payments mechanism. If velocity is relatively unaffected by monetary policy, the long-run rate of increase in prices (the inflation rate) is equal to the long-run growth rate of the money supply plus the exogenous long-run rate of velocity growth minus the long run growth rate of real output.
Rational expectations theory
Further information: rational expectations theory
Rational expectations theory holds that economic actors look rationally into the future when trying to maximize their well-being, and do not respond solely to immediate opportunity costs and pressures. In this view, while generally grounded in monetarism, future expectations and strategies are important for inflation as well.
A core assertion of rational expectations theory is that actors will seek to "head off" central-bank decisions by acting in ways that fulfill predictions of higher inflation. This means that central banks must establish their credibility in fighting inflation, or economic actors will make bets that the central bank will expand the money supply rapidly enough to prevent recession, even at the expense of exacerbating inflation. Thus, if a central bank has a reputation as being "soft" on inflation, when it announces a new policy of fighting inflation with restrictive monetary growth economic agents will not believe that the policy will persist; their inflationary expectations will remain high, and so will inflation. On the other hand, if the central bank has a reputation of being "tough" on inflation, then such a policy announcement will be believed and inflationary expectations will come down rapidly, thus allowing inflation itself to come down rapidly with minimal economic disruption.
See also: Austrian School and Monetary inflation
The Austrian School stresses that inflation is not uniform over all assets, goods, and services. Inflation depends on differences in markets and on where newly created money and credit enter the economy.Ludwig von Mises said that inflation should refer to an increase in the quantity of money that is not offset by a corresponding increase in the need for money, and that price inflation will necessarily follow.
Real bills doctrine
Main article: Real bills doctrine
The real bills doctrine asserts that banks should issue their money in exchange for short-term real bills of adequate value. As long as banks only issue a dollar in exchange for assets worth at least a dollar, the issuing bank's assets will naturally move in step with its issuance of money, and the money will hold its value. Should the bank fail to get or maintain assets of adequate value, then the bank's money will lose value, just as any financial security will lose value if its asset backing diminishes. The real bills doctrine (also known as the backing theory) thus asserts that inflation results when money outruns its issuer's assets. The quantity theory of money, in contrast, claims that inflation results when money outruns the economy's production of goods.
Currency and banking schools of economics argue the RBD, that banks should also be able to issue currency against bills of trading, which is "real bills" that they buy from merchants. This theory was important in the 19th century in debates between "Banking" and "Currency" schools of monetary soundness, and in the formation of the Federal Reserve. In the wake of the collapse of the international gold standard post 1913, and the move towards deficit financing of government, RBD has remained a minor topic, primarily of interest in limited contexts, such as currency boards. It is generally held in ill repute today, with Frederic Mishkin, a governor of the Federal Reserve going so far as to say it had been "completely discredited."
The debate between currency, or quantity theory, and the banking schools during the 19th century prefigures current questions about the credibility of money in the present. In the 19th century the banking schools had greater influence in policy in the United States and Great Britain, while the currency schools had more influence "on the continent", that is in non-British countries, particularly in the Latin Monetary Union and the earlier Scandinavia monetary union.
An increase in the general level of prices implies a decrease in the purchasing power of the currency. That is, when the general level of prices rise, each monetary unit buys fewer goods and services. The effect of inflation is not distributed evenly in the economy, and as a consequence there are hidden costs to some and benefits to others from this decrease in the purchasing power of money. For example, with inflation, those segments in society which own physical assets, such as property, stock etc., benefit from the price/value of their holdings going up, when those who seek to acquire them will need to pay more for them. Their ability to do so will depend on the degree to which their income is fixed. For example, increases in payments to workers and pensioners often lag behind inflation, and for some people income is fixed. Also, individuals or institutions with cash assets will experience a decline in the purchasing power of the cash. Increases in the price level (inflation) erode the real value of money (the functional currency) and other items with an underlying monetary nature.
Debtors who have debts with a fixed nominal rate of interest will see a reduction in the "real" interest rate as the inflation rate rises. The real interest on a loan is the nominal rate minus the inflation rate. The formula R = N-I approximates the correct answer as long as both the nominal interest rate and the inflation rate are small. The correct equation is r = n/i where r, n and i are expressed as ratios (e.g. 1.2 for +20%, 0.8 for −20%). As an example, when the inflation rate is 3%, a loan with a nominal interest rate of 5% would have a real interest rate of approximately 2% (in fact, it's 1.94%). Any unexpected increase in the inflation rate would decrease the real interest rate. Banks and other lenders adjust for this inflation risk either by including an inflation risk premium to fixed interest rate loans, or lending at an adjustable rate.
High or unpredictable inflation rates are regarded as harmful to an overall economy. They add inefficiencies in the market, and make it difficult for companies to budget or plan long-term. Inflation can act as a drag on productivity as companies are forced to shift resources away from products and services to focus on profit and losses from currency inflation. Uncertainty about the future purchasing power of money discourages investment and saving. Inflation can also impose hidden tax increases. For instance, inflated earnings push taxpayers into higher income tax rates unless the tax brackets are indexed to inflation.
With high inflation, purchasing power is redistributed from those on fixed nominal incomes, such as some pensioners whose pensions are not indexed to the price level, towards those with variable incomes whose earnings may better keep pace with the inflation. This redistribution of purchasing power will also occur between international trading partners. Where fixed exchange rates are imposed, higher inflation in one economy than another will cause the first economy's exports to become more expensive and affect the balance of trade. There can also be negative impacts to trade from an increased instability in currency exchange prices caused by unpredictable inflation.
- Cost-push inflation
- High inflation can prompt employees to demand rapid wage increases, to keep up with consumer prices. In the cost-push theory of inflation, rising wages in turn can help fuel inflation. In the case of collective bargaining, wage growth will be set as a function of inflationary expectations, which will be higher when inflation is high. This can cause a wage spiral. In a sense, inflation begets further inflationary expectations, which beget further inflation.
- People buy durable and/or non-perishable commodities and other goods as stores of wealth, to avoid the losses expected from the declining purchasing power of money, creating shortages of the hoarded goods.
- Social unrest and revolts
- Inflation can lead to massive demonstrations and revolutions. For example, inflation and in particular food inflation is considered as one of the main reasons that caused the 2010–11 Tunisian revolution and the 2011 Egyptian revolution, according to many observers including Robert Zoellick, president of the World Bank. Tunisian president Zine El Abidine Ben Ali was ousted, Egyptian President Hosni Mubarak was also ousted after only 18 days of demonstrations, and protests soon spread in many countries of North Africa and Middle East.
- If inflation becomes too high, it can cause people to severely curtail their use of the currency, leading to an acceleration in the inflation rate. High and accelerating inflation grossly interferes with the normal workings of the economy, hurting its ability to supply goods. Hyperinflation can lead to the abandonment of the use of the country's currency (for example as in North Korea) leading to the adoption of an external currency (dollarization).
- Allocative efficiency
- A change in the supply or demand for a good will normally cause its relative price to change, signaling the buyers and sellers that they should re-allocate resources in response to the new market conditions. But when prices are constantly changing due to inflation, price changes due to genuine relative price signals are difficult to distinguish from price changes due to general inflation, so agents are slow to respond to them. The result is a loss of allocative efficiency.
- Shoe leather cost
- High inflation increases the opportunity cost of holding cash balances and can induce people to hold a greater portion of their assets in interest paying accounts. However, since cash is still needed to carry out transactions this means that more "trips to the bank" are necessary to make withdrawals, proverbially wearing out the "shoe leather" with each trip.
- Menu costs
- With high inflation, firms must change their prices often to keep up with economy-wide changes. But often changing prices is itself a costly activity whether explicitly, as with the need to print new menus, or implicitly, as with the extra time and effort needed to change prices constantly.
- Labour-market adjustments
- Nominal wages are slow to adjust downwards. This can lead to prolonged disequilibrium and high unemployment in the labor market. Since inflation allows real wages to fall even if nominal wages are kept constant, moderate inflation enables labor markets to reach equilibrium faster.
- Room to maneuver
- The primary tools for controlling the money supply are the ability to set the discount rate, the rate at which banks can borrow from the central bank, and open market operations, which are the central bank's interventions into the bonds market with the aim of affecting the nominal interest rate. If an economy finds itself in a recession with already low, or even zero, nominal interest rates, then the bank cannot cut these rates further (since negative nominal interest rates are impossible) to stimulate the economy – this situation is known as a liquidity trap.
- Mundell–Tobin effect
- The Nobel laureate Robert Mundell noted that moderate inflation would induce savers to substitute lending for some money holding as a means to finance future spending. That substitution would cause market clearing real interest rates to fall. The lower real rate of interest would induce more borrowing to finance investment. In a similar vein, Nobel laureate James Tobin noted that such inflation would cause businesses to substitute investment in physical capital (plant, equipment, and inventories) for money balances in their asset portfolios. That substitution would mean choosing the making of investments with lower rates of real return. (The rates of return are lower because the investments with higher rates of return were already being made before.) The two related effects are known as the Mundell–Tobin effect. Unless the economy is already overinvesting according to models of economic growth theory, that extra investment resulting from the effect would be seen as positive.
- Instability with deflation
- Economist S.C. Tsiang noted that once substantial deflation is expected, two important effects will appear; both a result of money holding substituting for lending as a vehicle for saving. The first was that continually falling prices and the resulting incentive to hoard money will cause instability resulting from the likely increasing fear, while money hoards grow in value, that the value of those hoards are at risk, as people realize that a movement to trade those money hoards for real goods and assets will quickly drive those prices up. Any movement to spend those hoards "once started would become a tremendous avalanche, which could rampage for a long time before it would spend itself." Thus, a regime of long-term deflation is likely to be interrupted by periodic spikes of rapid inflation and consequent real economic disruptions. Moderate and stable inflation would avoid such a seesawing of price movements.
- Financial market inefficiency with deflation
- The second effect noted by Tsiang is that when savers have substituted money holding for lending on financial markets, the role of those markets in channeling savings into investment is undermined. With nominal interest rates driven to zero, or near zero, from the competition with a high return money asset, there would be no price mechanism in whatever is left of those markets. With financial markets effectively euthanized, the remaining goods and physical asset prices would move in perverse directions. For example, an increased desire to save could not push interest rates further down (and thereby stimulate investment) but would instead cause additional money hoarding, driving consumer prices further down and making investment in consumer goods production thereby less attractive. Moderate inflation, once its expectation is incorporated into nominal interest rates, would give those interest rates room to go both up and down in response to shifting investment opportunities, or savers' preferences, and thus allow financial markets to function in a more normal fashion.
A variety of methods and policies have been proposed and used to control inflation.
Main article: Monetary policy
Governments and central banks primarily use monetary policy to control inflation. Central banks such as the U.S. Federal Reserve increase the interest rate, slow or stop the growth of the money supply, and reduce the money supply. Some banks have a symmetrical inflation target while others only control inflation when it rises above a target, whether express or implied.
Most central banks are tasked with keeping their inter-bank lending rates at low levels, normally to a target annual rate of about 2% to 3%, and within a targeted annual inflation range of about 2% to 6%. Central bankers target a low inflation rate because they believe deflation endangers the economy.
Higher interest rates reduce the amount of money because fewer people seek loans, and loans are usually made with new money. When banks make loans, they usually first create new money, then lend it. A central bank usually creates money lent to a national government. Therefore, when a person pays back a loan, the bank destroys the money and the quantity of money falls. In the early 1980s, when the federal funds rate exceeded 15 percent, the quantity of Federal Reserve dollars fell 8.1 percent, from US$8.6 trillion down to $7.9 trillion.
Monetarists emphasize a steady growth rate of money and use monetary policy to control inflation by slowing the rise in the money supply. Keynesians emphasize reducing aggregate demand during economic expansions and increasing demand during recessions to keep inflation stable. Control of aggregate demand can be achieved using both monetary policy and fiscal policy (increased taxation or reduced government spending to reduce demand).
Fixed exchange rates
Main article: Fixed exchange rate
Under a fixed exchange rate currency regime, a country's currency is tied in value to another single currency or to a basket of other currencies (or sometimes to another measure of value, such as gold). A fixed exchange rate is usually used to stabilize the value of a currency, vis-a-vis the currency it is pegged to. It can also be used as a means to control inflation. However, as the value of the reference currency rises and falls, so does the currency pegged to it. This essentially means that the inflation rate in the fixed exchange rate country is determined by the inflation rate of the country the currency is pegged to. In addition, a fixed exchange rate prevents a government from using domestic monetary policy to achieve macroeconomic stability.
Under the Bretton Woods agreement, most countries around the world had currencies that were fixed to the U.S. dollar. This limited inflation in those countries, but also exposed them to the danger of speculative attacks. After the Bretton Woods agreement broke down in the early 1970s, countries gradually turned to floating exchange rates. However, in the later part of the 20th century, some countries reverted to a fixed exchange rate as part of an attempt to control inflation. This policy of using a fixed exchange rate to control inflation was used in many countries in South America in the later part of the 20th century (e.g. Argentina (1991–2002), Bolivia, Brazil, and Chile).
Main article: Gold standard